The Red Recover ankle pad allows you to enjoy the benefits of red light therapy on both high and low ankles. It's easy to use - simply wrap it around your ankle and secure it comfortably using the velcro tab. View the ankle wrap instructional video below.
To activate the device, press the power button.
The lights will turn on, indicating that your 15 minute session has begun.
At the end of the session, you'll hear three audible beeps, and the controller will automatically turn off.
This signals that your session is complete and you can remove the device.
Note: You will not see the infrared lights as they are not visible with the naked eye. Our eyes only allow us to see up to 700 nm of light wavelengths, which is why you can see the red light (680 nm).
Pro tip: Your camera can see infrared light wavelengths from 700 nm to 900 nm. You can use your phones camera like the image below to make sure your device is properly working.
Recommended usage: once a day therapeutically and 3 times a week for overall health maintenance or as a prophylactic measure.
If you are experiencing more pronounced symptoms, Red Recover may be used up to 3 times a day with at least three hours between sessions.
Please read the instruction manual provided with your device. For additional support or if you have any questions please contact us.
How does Red Recover and red light therapy work?
Red light therapy, also known as photobiomodulation therapy, is a non-invasive treatment that uses low-level red and near-infrared light to stimulate healing in the body. When the light is absorbed by the cells in the body, it triggers a series of events that can lead to improved health and well-being.
Here's a simple breakdown of how red light therapy works:
The light is absorbed by the cells in the body: When the red and near-infrared light is absorbed by the cells in the body, it triggers a series of events at the cellular level.
The light energy is converted into cellular energy: The absorbed light energy is converted into cellular energy, which can stimulate the production of ATP (adenosine triphosphate), the energy currency of the cell.
The production of ATP increases: The increased production of ATP leads to improved cellular function and increased healing.
The cells in the body are repaired and regenerated: The improved cellular function leads to the repair and regeneration of cells in the body, which can lead to a wide range of potential health benefits.
Overall, red light therapy is a safe and effective treatment with a wide range of potential health benefits.
Muscle injuries or fatigue may lead to decreased blood flow and reduced amounts of oxygen and glucose to cells. When this happens the mitochondria cannot manufacture normal amounts of ATP. If ATP production is compromised, then the body is no longer functioning at optimal levels.
Because the mitochondria are very sensitive to light, application of light energy can stimulate ATP production in the mitochondria.
To use:
Place the cervical pad on your cervical
Let the straps rest on your neck or secure them using the velcro tab.
To activate the device, simply press the power button.
Once the lights on your device are activated, you can start your 15 min session.
At the end of the session you will hear three audible beeps, then the controller will turn off automatically. This will indicate that your session is complete and you can remove your device.
Note: You will not see the infrared lights as they are not visible with the naked eye. Our eyes only allow us to see up to 700 nm of light wavelengths, which is why you can see the red light (680 nm).
Pro tip: Your camera can see infrared light wavelengths from 700 nm to 900 nm. You can use your phones camera like the image below to make sure your device is properly working.
Recommended usage: once a day therapeutically and 3 times a week for overall health maintenance or as a prophylactic measure.
If you are experiencing more pronounced symptoms, Red Recover may be used up to 3 times a day with at least three hours between sessions.
Please read the instruction manual provided with your device. For additional support or if you have any questions please contact us.
To activate the device, simply press the power button.
Once the lights on your device are activated, you can start your 15 min session.
At the end of the session you will hear three audible beeps, then the controller will turn off automatically. This will indicate that your session is complete and you can remove your device.
Note: You will not see the infrared lights as they are not visible with the naked eye. Our eyes only allow us to see up to 700 nm of light wavelengths, which is why you can see the red light (680 nm).
Pro tip: Your camera can see infrared light wavelengths from 700 nm to 900 nm. You can use your phones camera like the image below to make sure your device is properly working.
Recommended usage: once a day therapeutically and 3 times a week for overall health maintenance or as a prophylactic measure.
If you are experiencing more pronounced symptoms, Red Recover may be used up to 3 times a day with at least three hours between sessions.
Please read the instruction manual provided with your device. For additional support or if you have any questions please contact us.
How does Red Recover and red light therapy work?
Muscle injuries or fatigue may lead to decreased blood flow and reduced amounts of oxygen and glucose to cells. When this happens the mitochondria cannot manufacture normal amounts of ATP. If ATP production is compromised, then the body is no longer functioning at optimal levels.
Because the mitochondria are very sensitive to light, application of light energy can stimulate ATP production in the mitochondria.
Specs:
108 total lights
47 red lights (680 wavelength)
61 infrared lights (830 & 950 wavelength)
Hand & Wrist Mitt
Regular price
$200.00
/
The Red Recover hand and wrist pad makes it easy and comfortable to use red light therapy for your hand and wrist.
The hand and wrist pad is easy to use.
Place your hand inside of the glove.
To activate the device, simply press the power button.
Once the lights on your device are activated, you can start your 15 min session.
At the end of the session you will hear three audible beeps, then the controller will turn off automatically. This will indicate that your session is complete and you can remove your device.
Note: You will not see the infrared lights as they are not visible with the naked eye. Our eyes only allow us to see up to 700 nm of light wavelengths, which is why you can see the red light (680 nm).
Pro tip: Your camera can see infrared light wavelengths from 700 nm to 900 nm. You can use your phones camera like the image below to make sure your device is properly working.
Recommended usage: once a day therapeutically and 3 times a week for overall health maintenance or as a prophylactic measure.
If you are experiencing more pronounced symptoms, Red Recover may be used up to 3 times a day with at least three hours between sessions.
Please read the instruction manual provided with your device. For additional support or if you have any questions please contact us.
How does Red Recover and red light therapy work?
Muscle injuries or fatigue may lead to decreased blood flow and reduced amounts of oxygen and glucose to cells. When this happens the mitochondria cannot manufacture normal amounts of ATP. If ATP production is compromised, then the body is no longer functioning at optimal levels.
Because the mitochondria are very sensitive to light, application of light energy can stimulate ATP production in the mitochondria.
Using your RedRecover K9 pads is completely painless and easy for you and your dog.
Simply lay your RedRecover red light pad on your dog or wrap it around the area you want to target, and press the on button located on the battery. There are no complicated settings, timers, or apps to integrate. The pad will shut off automatically after your dog receives the 15 minutes of treatment. Then simply remove the pad. You can treat your dog with healing red light anywhere any time with our K9 RedRecover light therapy pads.
The Red Recover kneed pad makes it easy to deliver red light therapy to your knee joint for either general wellness and to maintain joint health and flexibility.
Using the Red Recover knee pad is easy:
Start by wrapping the knee pad around the knee
Secure it in place using the velcro strap.
To activate the device, simply press the power button.
Once the lights on your device are activated, you can start your 15 min session.
At the end of the session you will hear three audible beeps, then the controller will turn off automatically. This will indicate that your session is complete and you can remove your device.
Note: You will not see the infrared lights as they are not visible with the naked eye. Our eyes only allow us to see up to 700 nm of light wavelengths, which is why you can see the red light (680 nm).
Pro tip: Your camera can see infrared light wavelengths from 700 nm to 900 nm. You can use your phones camera like the image below to make sure your device is properly working.
Recommended usage: once a day therapeutically and 3 times a week for overall health maintenance or as a prophylactic measure.
If you are experiencing more pronounced symptoms, Red Recover may be used up to 3 times a day with at least three hours between sessions.
Please read the instruction manual provided with your device. For additional support or if you have any questions please contact us.
How does Red Recover and red light therapy work?
Muscle injuries or fatigue may lead to decreased blood flow and reduced amounts of oxygen and glucose to cells. When this happens the mitochondria cannot manufacture normal amounts of ATP. If ATP production is compromised, then the body is no longer functioning at optimal levels.
Because the mitochondria are very sensitive to light, application of light energy can stimulate ATP production in the mitochondria.
The Red Recover lumbar pad delivers healing red light with 3 powerful wavelengths. The lumbar pad is easy to use. Simply wrap around your lower back and use the velcro tab to secure comfortably.
To activate the device, simply press the power button.
Once the lights on your device are activated, you can start your 15 min session.
At the end of the session you will hear three audible beeps, then the controller will turn off automatically. This will indicate that your session is complete and you can remove your device.
Note: You will not see the infrared lights as they are not visible with the naked eye. Our eyes only allow us to see up to 700 nm of light wavelengths, which is why you can see the red light (680 nm).
Pro tip: Your camera can see infrared light wavelengths from 700 nm to 900 nm. You can use your phones camera like the image below to make sure your device is properly working.
Recommended usage: once a day therapeutically and 3 times a week for overall health maintenance or as a prophylactic measure.
If you are experiencing more pronounced symptoms, Red Recover may be used up to 3 times a day with at least three hours between sessions.
Please read the instruction manual provided with your device. For additional support or if you have any questions please contact us.
How does Red Recover and red light therapy work?
Muscle injuries or fatigue may lead to decreased blood flow and reduced amounts of oxygen and glucose to cells. When this happens the mitochondria cannot manufacture normal amounts of ATP. If ATP production is compromised, then the body is no longer functioning at optimal levels.
Because the mitochondria are very sensitive to light, application of light energy can stimulate ATP production in the mitochondria.
The Red Recover shoulder pad delivers powerful red light therapy all in a portable, easy to use medical grade device.
The shoulder pad is easy to use.
Start by placing the pad over the shoulder you'd like to treat.
Secure it with the velcro wrap.
To activate the device, simply press the power button.
Once the lights on your device are activated, you can start your 15 min session.
At the end of the session you will hear three audible beeps, then the controller will turn off automatically. This will indicate that your session is complete and you can remove your device.
Note: You will not see the infrared lights as they are not visible with the naked eye. Our eyes only allow us to see up to 700 nm of light wavelengths, which is why you can see the red light (680 nm).
Pro tip: Your camera can see infrared light wavelengths from 700 nm to 900 nm. You can use your phones camera like the image below to make sure your device is properly working.
Recommended usage: once a day therapeutically and 3 times a week for overall health maintenance or as a prophylactic measure.
If you are experiencing more pronounced symptoms, Red Recover may be used up to 3 times a day with at least three hours between sessions.
Please read the instruction manual provided with your device. For additional support or if you have any questions please contact us.
How does Red Recover and red light therapy work?
Muscle injuries or fatigue may lead to decreased blood flow and reduced amounts of oxygen and glucose to cells. When this happens the mitochondria cannot manufacture normal amounts of ATP. If ATP production is compromised, then the body is no longer functioning at optimal levels.
Because the mitochondria are very sensitive to light, application of light energy can stimulate ATP production in the mitochondria.
The Red Recover universal pad delivers healing red light with 3 powerful wavelengths. Simply wrap around the area of the body you would like to apply red light therapy. Use the velcro tab to secure comfortably.
To activate the device, simply press the power button.
Once the lights on your device are activated, you can start your 15 min session.
At the end of the session you will hear three audible beeps, then the controller will turn off automatically. This will indicate that your session is complete and you can remove your device.
Note: You will not see the infrared lights as they are not visible with the naked eye. Our eyes only allow us to see up to 700 nm of light wavelengths, which is why you can see the red light (680 nm).
Pro tip: Your camera can see infrared light wavelengths from 700 nm to 900 nm. You can use your phones camera like the image below to make sure your device is properly working.
Recommended usage: once a day therapeutically and 3 times a week for overall health maintenance or as a prophylactic measure.
If you are experiencing more pronounced symptoms, Red Recover may be used up to 3 times a day with at least three hours between sessions.
Please read the instruction manual provided with your device. For additional support or if you have any questions please contact us.
How does Red Recover and red light therapy work?
Muscle injuries or fatigue may lead to decreased blood flow and reduced amounts of oxygen and glucose to cells. When this happens the mitochondria cannot manufacture normal amounts of ATP. If ATP production is compromised, then the body is no longer functioning at optimal levels.
Because the mitochondria are very sensitive to light, application of light energy can stimulate ATP production in the mitochondria.
The Universal Pad for your K9:
If your dog has hip or shoulder issues, we recommend ordering our K9 wrap. However, for general wellness treatment or for spot treatments we recommend the Universal pad.